My 3-speed transmission started out very similar to my engine, an empty case and a pile of parts, all in need of cleaning. So the first step was to break everything down into individual pieces and perform a thorough inspection of each piece, to see which parts just needed cleaning and which parts needed […]
Rebirth of an American Classic: Transmission Rebuild Read More »
Well, here we are, past the point of no return. In this chapter I cover the reassembly of the 1964FL restoration. I have been working on this classic for the past nine months. I know it says frame above, but the frame was bone stock, no dings, or mods. The customer requested paint over powder,
1964 Pan Head part 4 (frame) Read More »
Mudflap 8: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Part_8_Wiring_World.aspxMudflap 9: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Build_part_9.aspx I’ve been riding and tuning Mudflap Girl FXR for a couple of months. We finally dialed in our rear shocks, maybe. David Zelma, from Progressive taught me the ropes regarding spring pressure and travel. We will get into that. We have also been monkeying with my Spitfire Girder shocks. Again,
Mudflap Girl FXRs, Part 10, Suspension Tuning and Le Pera Seat Read More »
Mudflap Girl, chapter 10: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Part_10_Suspension_Tuning_and_Le_Pera_Seat.aspx I can’t make it to Sturgis this year. We are focused Bonneville builds, like mad starving dogs, and the two events are only separated by two weeks. Ray is tuning and I still don’t have an engine, but we’ll cover that later. The engine could be running today, in Richmond,
Mudflap Girl FXRs, part 11: The First Road Test Read More »
Check the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_5_Sponsored_by_Xpress.aspx This process is amazing. Not only are Gary Maurer, Kustoms Inc., and Julie, the lead builders, but they dragged this roller in various stages to over eight shows and events. It’s actually set up at the Broken Spoke in Sturgis right this fuckin’ minute. When I interviewed Gary, while Jules
Bikernet/Cycle Source Sweeps Build Part 6 Sponsored by Xpress Read More »
Eric Bennett grabbed the shop door chain and hoisted the roll up door for the first time, in 2000. He started his mechanical career as a certified diesel mechanic with 60-weight always flowing through his blood stream. Finally, he gave into his entrepreneurial spirit and his desire to make motorcycles his life—he opened his own
Bennett’s Performance 2004 Dyna Build 106-Incher Read More »
Don’t miss the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_6_Sponsored_by_Xpress.aspx Hang on. We are two weeks away from running out to Vegas for Bikefest and pulling the winner of this most magnificent custom motorcycle, specifically built for Bikernet and Cycle Source fans, readers, and subscribers. You need to sign up, if you haven’t, or come to the Cashman
Bikernet/Cycle Source Sweeps Build Part 7 Sponsored by Xpress Read More »
Not too long ago, my good friend Timbo approached me with a proposition, restore his 1964 Harley FL, I agreed. Problem was, it’s in a box, literally! So after a brief discussion on exactly what we wanted to do, how much it would cost and the possible value at the end of the rainbow, I
Timbo’s ’64 FL Restoration (Part One) Read More »
Here’s the link to Mudflap Girl Part 11: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_part_11_The_First_Road_Test.aspx My son’s Mudflap Girl FXR is running and partially broken in. I even, finally, dialed in the Wire Plus Speedometer, and it’s working. I wish I knew what I was doing wrong, but that puppy works like a champ. I enjoy the tightness of the display
Mudflap Girl FXR Part 12—She meets S&S Read More »
1964 was an interesting year for Harley. it was the last year of the 6-volt electrical system, and last year for the kick-start only. In 1965 they stepped up to 12-volt system and the first electric start and massive batteries started to appear. So let’s get started, I removed the primary, to my surprise it
Timbo’s ’64 FL Restoration (Part Two) Read More »
You’ve been watching this sweepstakes bike come together for four episodes. A terrific chopper industry team was established to build you a one-off, world-class custom motorcycle. What could be better? Just fill out a coupon or subscribe to Cycle Source or Bandit’s Cantina on Bikernet, and you could enjoy this puppy forever. This segment
Bikernet/Cycle Source Sweeps Build Part 4 Sponsored by Xpress Read More »
We have a goofy Shovelhead in the Bikernet shop called the 1928 Shovelhead. It has 21-inch wheels front and rear in a Paughco rigid frame, but some 1928 elements were used, including the re-pop semi-flat sided tanks, the rear fender and perhaps the seat. The bike was conceived by Bandit the bastard, built by the
Rivera-Primo Brute II Install Read More »
Here’s the link to Part 12: http://www.bikernet.com/pages/Mudflap_Girl_FXR_Part_12She_meets_SS.aspx Okay, so my Mudflap Girl FXR was running fine and I enjoyed every ride with the bare chassis, but I got a hair to treat the frame and powder coat some parts, but the corrosion treatment made the frame look almost black, and I didn’t want to build
Mudflap Girl FXR Part 13 New Paint and More Read More »
Don’t miss the last episode: http://www.bikernet.com/pages/BikernetCycle_Source_Sweeps_Build_Part_4.aspx I’ve never had so much fun building a bike, and it’s not for me. This one-off custom, art object, long-run bobber, chopper, will be awarded to either a Cycles Source subscriber or a Bandit’s Cantina subscriber on Bikernet.com. There’s always a growing buzz around building any bike. The vibe
Bikernet/Cycle Source Sweeps Build Part 5 Sponsored by Xpress Read More »
Here’s a link to the last chapter: http://www.bikernet.com/pages/Mudflap_Girl_FXRs_Part_8_Wiring_World.aspx What a year, and we’re cranking on so many two-wheeled fronts. Both Mudflap Girl bikes are running and one is in the wind, but I’d better back up. You’re going to love this tech, and the ending. I took the Mudflap Girl bike to Saddlemen during the
Mudflap Girl FXRs Build, part 9 Read More »
Hang onto your asses. This is going to rock your boat, or your solo seat springs. We are building a bike just for you. That’s right. A Cycle Source or Bikernet reader will own this one-off custom at the end of this year. No, I’m not kidding. This world-class team of builders, lead by Prince
Bikernet/Cycle Source Sweeps Build, Part 3, Sponsored by Xpress Read More »
ACORN NUTS MEET THE MUDFLAP GIRL– P/N: MK731: 110-Piece Solid Brass Acorn Nut Assortment Tray Brass is class, and a great gift idea for old school bikers! Conveniently stored in the heavy-duty Tray with lid is a 110 piece assortment of Solid Brass Low Crown acorn nuts in 12 of the most popular UNC &
ACORN NUTS MEET THE MUDFLAP GIRL Read More »
I’m using a Baker DD6 transmission and they mount on a 5 speed transmission plate as used in Evolution Softail frames. I don’t care for the flimsy stamped sheet metal trans mounting plates available commercially so I opted to make my own. Back in the day we used to have V shaped rear
Doug Coffey’s RetroMod Panhead Part 2 Read More »
Having been in the aftermarket Harley business since 1969, I have pretty much done everything from lacing wheels and custom painting to establishing a performance specialty manufacturing company known as Head Quarters. Over the years everything in Harley-Davidson aftermarket world has evolved. Today finds old timers like myself better skilled with
Doug Coffey’s RetroMod Panhead Part 1 Read More »
The Sturgis Shovel has seen its share of LA Harbor town back alleys in the eight years of pounding the streets around Wilmington, California. The exhaust is really starting to show the effects of the road and weather. Originally these hand fabricated pipes were painted with barbeque paint found lying around the Bikernet Intergalactic
Sturgis Shovel Gets A Wrap Read More »
After the engine was removed from the frame, I mounted it on an engine stand and clamped it to a work mate. This worked perfect, as I have limited working space due to all my daunting, ongoing projects. I got lucky with this engine, as I later found out it had recently been rebuilt
Timbo’s ’64FL Panhead Part 3, Engine Read More »
Click here for: Mudflap Girl Part 4, the Spitfire Frames to Roller Life is nuts, but we are scrambling on the Mudflap Girl FXRs, at least mine. Us old farts constantly have discussions about how unmotivated kids are. I want to work on my bike constantly. Every waking minute I’m thinking about it, about
Mudflap Girl FXR, Part 5 Read More »
Click here for: Mudflap Girl Part 3, the Bandit Engine Completed Suddenly we’re smoking on the Mudflap Girl FXRs, but the week after I received the frames, I had to jump a plane to New Orleans and ride a Victory to the Smoke Out. I was itching to work on these bikes. I survived the
Mudflap Girl Part 4, the Spitfire Frames to Rollers Read More »
Hang on for a chance to win this bike. The odds will be terrific, so step up and enter, or subscribe to Bandit’s Cantina on Bikernet.com, or Cycle Source Magazine, and we will take care of your entry into the drawing towards the end of the year. In the meantime, grab a beer and enjoy
Bikernet/Cycle Source Sweeps build part 2, Sponsored by Xpress Read More »
