Sponsored By Now here’s the test. If you’ve been paying attention, you’ll notice that I DIDN’T put on the secondary belt before we put on the motor plate! Just remember to do this and save yourself the removal of the assembly to fix this mistake. With everything in place, I put the friction plate back […]
Digital’s Rigid – Part IV (Continued 6) Read More »
Sponsored By Once the tape was removed, a small Dremel tool was used to strip the area down to the bare metal. The area was cleaned and the engine was placed back in the frame over the bare metal spots. On to Part 4, Page 4…. Back to Part 4, Page 2…. Back to Custom
Digital’s Rigid – Part IV (Continued 2) Read More »
Sponsored By Although you haven’t seen it in a fully assembled state, the rigid has actually been mocked up to completion. However, anyone who’s built their own sled knows that an assembled bike without paint and powder just isn’t quite the same as the finished product. Although a primered mock-up will show you the lines
Digital’s Rigid – Part IV Read More »
OK, I know….. It’s a shitty photo. Sorry folks. The good news is, it’s promted me to goout and buy a new camera – so keep an eye out for some high quality photography in the nextinstallment. So here it is. Actually, as I write this, the project is a little further than the photowould
Digital’s Rigid – Part III Read More »
The above photo details the back end of the Atlas Precision ‘Roadrunner’ frame. Attached is a 9″ wide stubby fender, also supplied by Atlas. Both the fender and the frame are designed to handle 200 mm meat. We’ll be using a 180 for the project. Since wide tire aftermarket frames require special fenders, you have
Digital’s Rigid 2001 Part 1 (Continued) Read More »
THE GUNNY INVESTIGATION–TRAINING AND TOUGHER LAWS THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call us at 1-(800) ON-A-BIKE or visit us on our website at http://www.ON-A-BIKE.com.From
December 21, 2003 Read More »
THE BISH INVESTIGATION–MOVIES, RESTAURANTS AND LEGAL WRANGLING Bill Bish author and freedom fighter.THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call us at 1-(800) ON-A-BIKE or visit
December 17, 2003 Read More »
GUNNY SACK TEARS AT THE NHSTA, COPS IN SAN FRAN, WOMAN RIDES TO BASE CAMP AND MORE The famous Gunny.THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information,
November 20, 2003 Read More »
THE BILL BISH REPORT FOR NOVEMBER–VIRGINIA, NEW YORK, THE INTERNET, MICHIGAN, UPS, GEORGIA AND ALL OVER THE WORLD THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call
November 17, 2003 Read More »
Hey, Bandit… we just rolled in from Biketoberfest in Daytona Beach, Florida. Man, the weather was perfect this year, sunny and warm, just like it’s should be for a bike run. The temperature was in the 70s-80s during the day, with only a hint of some clouds, on Friday. In the evening, the temperature was
Biketoberfest 2003 Franks Way Read More »
Choppers Inc creation and cutieTo tell the truth, I didn't plan to attend to Biketoberfest. My to-do paint list was over the moon. Yet looking back, it was all worth it. I had no idea of the nutty time awaiting me. The initial plan was simple, go to the Corbin party, maybe hang out with
Biketoberfest 2003 Read More »
GUNNY SACK RIGHTS REPORT–GYPSY JOKERS WIN, SAN FRANCISCO PARKS BIKES ON SIDEWALKSTHE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call us at 1-(800) ON-A-BIKE or visit us
RIGHTS NEWS–HALL OF FAME SEARCH, BEIRUT BIKE BAN, BEATLES, INDIAN DOWN FOR THE COUNT, SCOOTERS RECALLED AND ANOTHER GREAT NOTION FROM TEXAS Author Bill BishCOAST TO COAST BIKER NEWSCompiled & Edited by Bill Bish,National Coalition of Motorcyclists UN TO REGULATE HELMET USAGE? In documents submitted to the United Nations during a recent road safety meeting
RIGHTS NEWS–NUDE RIDERS, SALES UP, MOTORCYCLE AWARENESS NEEDS YOUR HELP AND OKAY TO WEAR COLORS IN COURT Author and freedom fighter Bill Bish.THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester.
September 17, 2003 Read More »
THE GUNNY SACK NEWS–FUNERAL MOTORCYCLES, OREGON HARRASSMENT and JEANSTHE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call us at 1-(800) ON-A-BIKE or visit us on our website
September 5, 2003 Read More »
Hail storm over the Black HillsI'm late as usual, but painting bikes for 24 years has given me muchopractice at being late. In fact, Eddie Trotta musta gone on 20 minutesbitching about painters when I saw him at Mike Lichter's Show in RapidCity. In fact, he's even trying to do some of the actual artwork
The Frank Kaisler Report Hey, Bandit. We arrived in Sturgis in record time. We unloaded our gear in the rickety rental house and immediately headed out to the Full Throttle Saloon to catch the deal with the Discovery Channel between Indian Larry and Billy Lane. You know dipshit, the Biker Build Off thing that's been
Sturgis 2003 Double Feature Read More »
GUNNY’S LEGISLATIVE UPDATE–NEW YORK SETS UP BIKER CHECK POINTS–WATCH OUT The famous Gunny.THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more information, call us at 1-(800) ON-A-BIKE or visit
NCOM NEWS–EPA NOTIONS, BEN “NIGHTHORSE” CAMPBELL RUNS, WISCONSIN GONE NUTS AND GIVING UP FREEDOM FOR INSURANCE PROFITS– Author Bill Bish, a freedom fighter forever.THE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M.
THE GUNNY REPORT–FROM 200 MILES AWAYTHE AIM/NCOM MOTORCYCLE E-NEWS SERVICE is brought to you by Aid to Injured Motorcyclists (A.I.M.) and the National Coalition of Motorcyclists (NCOM), and is sponsored by the Law Offices of Richard M. Lester. For more Information, call us at 1-(800) ON-A-BIKE or visit us on our website at http://www.ON-A-BIKE.comFrom TheGUNNY’S
BILL BISH WITH NATIONAL RIGHTS NEWS FROM A.I.M.COAST TO COAST BIKER NEWSCompiled and Edited by Bill Bish, National Coalition of Motorcyclists Bill Bish, author, national motorcycle rights freedom fighter, legal analysist, good guy. PENNSYLVANIA HELMET FREEDOM! CONGRATULATIONS to ABATE of Pennsylvania and Keystone State motorcyclists, who scored a monumental victory over the Independence Day Weekend
Using a tape measure, or if not available a piece of string, raise the bike to upright position. Start by holding the tape measure straight down from the front axle to the floor. Put a mark on the floor at that point. Then, place the tape parallel to the steering axle, following the angle of
Bandit’s Garage: Pat Kennedy Trail Tip Read More »
<>I finally got “The Meanest” to send you these photos of the front endchange we performed on my Super Glide. First, a little background onthe bike. I bought it in March of this year at the dealership whereI work, Harley-Davidson of Charlotte. It was a consignment bike, Igot a real good price on it when
Makin’ Custom Wheel Spacers From Narrow To Wide Read More »
