Free Departments

The European Championship was initially conceived as an engineering and design showcase that, with the Official World Championship, will be held during Sturgis Bike Week in the United States later this year (August 6th-8th). The European and World Championship program, along with its endorsement of approved national affiliate events around Europe and elsewhere, brought builders […]

“You wanted the best,” The announcer screamed into the stage mike. “You got it, the best the hottest band in the world KISS!” That’s what you heard just before one of the most influential rock-n-roll bands of Michael Lima’s time took the stage. ”Now comes the two wheeled version,” Michael or Mike, the builder said.

This may sound crazy, but like every other bike builder in the country, I’ve been dying to be featured on Hugh King’s Original Productions, Biker Build-offs. I called Hugh numerous times, sent flowers and postcards, nothing. So we decided that we would show Hugh and the gang what Bikernet was truly capable of, over a

Fourth place went to Vaclav Vavra whose ‘Breakin’ the Rules’ backed up his fifth place in the 2005 Official World Championship of Custom Bike Building held in Las Vegas in November last year. This bike is a machining work marvel, another low mechanical looking motorcycle from the future. It’s set up as if motorcycles (and

Editor’s note:This bike comes at an interesting time. We’re about to launch the Girls of Bikernet and brothers have been fighting over the Japanese influence in our lives. I ran across this bike sometime ago at an event and told the builder how knocked out I was about the paint, the white base and smooth

Third place went to Charly Gregoire of Red Baron Choppers in Belgium for ‘Revenge’, a transverse mounted V-twin, finished throughout in aluminum and stainless steel. It had been a hot tip for Euro champs honours ever since the bike took ‘Best in Show’ on its debut at MotorSale and a Class Win at the Belgian

Second place went to custom show newcomer Stellan Egeland of SE Service from near Stockholm in Sweden. Stellan got a huge ovation from the crowd attending the awards ceremony for his remarkable Flathead engined drag-race inspired ‘Esox Lucius’ (Pike). It was only the second bike built by the hot-rod specialist, and it won admiration throughout

By: Darren ho Fusion I’m just a biker who found a living in the motorcycle press side of our industry, thanks to the big bastard Bandit. Some call me a writer others a hack, so when a talented builder, craftsman, designer, engineer volunteers to write his own story, I’ll head to the bar and let

California Customs has built the fine ride you see on this page. The company has a long history of creating one-off customs. They describe it best on their website. Here’s a brief history to give you an idea what they are all about: CALIFORNIA CUSTOMS WAS ESTABLISHED IN 1991 IN NORTHERN CALIFORNIA. ORIGINALLY KNOWN AS

It was a cold and rainy Ohio afternoon and Old School Jeff, a Sucker Punch Sally partner, was dreaming up his next bike. It had to outdo the bikes he’d built before, represent the company, and it had to be ride-able. Jeff’s deadline, to have the bike finished by the Big, V-twin expo, but distractions

Strange mysterious e-mails flashed onto my screen with images of this sharp Cyril Huze Panhead. At first I didn’t know what the hell was going on. The return address was Accurate engineering, but the bike was signature Cyril Huze. At first I was told I had a sharp feature for Bikernet Readers, then the bike

This story is about a Menlo Park, California, industrial coating shop that started three generations ago, in 1966, with Bob Simpson’s granddad. We’ll cover what they did throughout the history of the shop, info on the bikes and which bitchin’ coatings do what. Not bad for one stinkin’ bike feature hammered out on the Monday

No jive, New York City or Manhattan, as is the case for Nick Genender, of New York City Choppers, is a heaven on earth. We have this notion of NYC as the ultimate crime capital, teaming with druggies, homeless and narrow streets. Old tenement buildings crumble while the traffic screams past, fulla shouting drivers, and

The two builders and their teams met in Two Harbors Minnesota on Tuesday (6/13/2006) in preparation for the ride that started at the Split Rock Lighthouse just north of the rock, on Wednesday morning at sunup. The lighthouse is approximately 100 miles south of Canada on Lake Superior and very scenic. Oh YEAH! It was

It was a really warm morning in Cave Creek Arizona when I was to meet John Shope of SSinster Choppers with the Copperhead 2 and my model, Chainsaw Chelsea, to shoot a feature for Bikernet.com. You can find that feature in the Girls Of Bikernet section, in Bandit’s Cantina. If you’re not a member, you’re

This feature deserves a special award. Twin Club MC is one of the oldest and most respected motorcycle clubs in Sweden. It was founded in Norrtälje in the autumn of 1969. For 34 years, since 1974, Twin Club MC produced the biggest and most prestigious Custom Motorcycle Show in all of Scandinavia. Builders from Sweden,

Fabricator Kevin Verkest is the well-known “Sultan of Steel”.At his shop in Clinton Township, Michigan, Kevin takes hunks of steel and turns them into fantastic parts and accessories for just about any type of bike. This year, Kevin was chosen to be one of the builders in the Horse Magazines “CHOP OFF 2006” at the

Here’s the deal, stirred up a couple of weeks ago with one shot of the above motorcycle, based on a seven-cylinder Rotec rotary airplane engine. Rumors spread quickly and we received another shot of an inline 8-cylinder airplane-based, rotary-engine motorcycle. Of course I contacted my rare-motorcycle guru, Don Whalen, of Sierra Madre Motorcycles in Pasadena,

When my amigo, Tom “The German”, told me that his company, Demon’s Cycle South, had just finished a new project bike, I figured it’d be special. I’ve seen their work before, and I’ve never failed to be impressed, but this time they’ve outdone themselves. Not only that, as you can plainly see, they got the

The finals for the Official World Championship will be held during Sturgis Bike Week in the United States later this year (August 6th-8th). The European and World Championship program, includes endorsements of approved national affiliate events around Europe and elsewhere. It all comes together this year in Sturgis. We’ll bring you the final report and

We have all seen them, upsets. An upset can take a stale situation and breathe fresh new life into it like the sound of a V-Twin roaring to life for the first time at 5 o’clock in the morning. Epic battles comparable to boxing’s Ali-Foreman, Tyson-Douglas. Or take a subjective sport like bodybuilding where just

Rollin‚ Sixes Choppers was formed by family and friends and is run by family and friends. We are third generation bikers who know our way around the shop. We are real bikers who build real bikes for bikers who love to ride. We specialize in custom builds that people can truly afford and also in

Damn, the bikes coming out of this industry are amazing, and Gard Hollinger is one of those builders who dazzle me every time I see one of his bar blasters. No wonder Saxon chose Gard as their custom bike and accessory designer and he was the co-star on the Build-or-Bust television series. But let’s back

I recently had the pleasure of judging a Canadian show, along with Master Builder Chica, Sweden’s Peter Jonsson, from MCM magazine, and Canada’s own top builder Tom Langton. We reviewed Canadian Championship of Bike Building contestants during Labor Day Weekend in Wembley, Alberta. Spending a weekend in the vast Canadian prairie together helped me gain