JIMS
Double Barrel Pump Up
(Continued)
Push Your Twin-Cam out to 95
Cubic Inches
By
Oz
(Previous
Page.......) |
You’re now ready to pull off the old cylinders,
but you’ve got to watch out for anything falling into the case. In order
to keep foreign material out of the case, ease the cylinders up, part way,
and stuff a couple of shop towels around each rod (Photo 9).
Photo 9
Once that’s done, go ahead and pull the
cylinders the rest of the way off (Photo 10).
Photo 10
The old pistons can now be removed. The
pistons use full floating pins and, once the snap rings are taken out (Photo
11).
Photo 11
JIMS pin tool can slide them right out
(Photo 12).
Photo 12
ENTER THE CANTINA
Search Bikernet.com using
Bikernet.com - Est. January, 1996
CONTACT INFORMATION
Bikernet.com
200 Broad Ave, Wilmington, CA 90744
Phone (310) 830-0630
E-Mail Bandit E-Mail Sin Wu
|
 |
Bandit's Bikernet is
a registered trademark of 5 Ball,
Inc.
© 5 Ball, Inc.1996 -
2000. All Rights Reserved. |
|